⇪  DOWNLOAD

A: Should glove replacement cycles differ by job type?

Q: Yes. High-risk/high-wear roles (e.g., metalworking, construction) require more frequent replacement than low-risk roles (e.g., warehousing, quality control). Implement a tiered replacement schedule with differentiated cycles based on actual usage intensity per role.

A: Does the coating on dipped gloves peel off?

Q: Quality gloves are vulcanized for strong bonding between coating and fibers. However, prolonged friction or exposure to strong solvents will gradually wear down the coating. Test by rubbing or flexing to check adhesion.

A: How to determine if glove samples are acceptable?

Q: Verify against product datasheets: measure thickness, check weight, compare color against standard; conduct wear tests for comfort/dexterity; perform basic friction and stretch tests; for professional data, send to third-party labs.

A: How should gloves be properly stored?

Q: Store in a cool, dry, ventilated place, away from direct sunlight and heat sources (e.g., radiators); keep away from ozone sources (e.g., motors, high-voltage equipment); avoid mixing with corrosive chemicals; hang or lay flat to prevent deformation; periodically check stock condition.

A: What’s the difference between CE and ANSI certification?

Q: CE is mandatory compliance marking for the EU, requiring EN standards. ANSI is a US voluntary standard (ANSI/ISEA 105). Test methods and level classifications differ — the same glove may have different level expressions under each system.